Industry News, News

Do you Know what Characteristics Austenitic Stainless Steel has During Cutting?

                       
Update:12-02-2022
Summary:

Various stainless steel material workpieces are encount […]

Various stainless steel material workpieces are encountered in the cutting process, and the cutting formation and removal characteristics of different stainless steel material workpieces are different. Below we briefly share their cutting characteristics with you.

We all know that stainless steel is an alloy material with a minimum chromium content of 11-12%, and the carbon content is usually very low. The main alloy components are nickel, molybdenum and titanium, which form a dense protective film on the surface of the stainless steel to make Its corrosion resistance is stronger.

Stainless steel workpieces form irregular flaky chips during the cutting process. Compared with ordinary steel, the cutting is higher. There are many different types of stainless steel material workpieces, such as austenitic stainless steel, ferritic stainless steel, deceptive stainless steel, duplex stainless steel and precipitation hardening stainless steel. The chip braking performance is also different due to the alloy characteristics of the stainless steel workpiece and the heat treatment process.

Huzhou Nanxun Yintuo Special Material Technology Co., Ltd. is a factory specializing in the production of ferritic stainless steel seamless pipe and tube. We are committed to producing austenitic stainless steel seamless tubes and other types of seamless tubes. If you need to order seamless tubes, You can consider working with us.

Views: 88